Roller Bearing Assembly - 1-3/8" x UCFL207 - [401-020-701]
$86.00
SKU
401-020-701
The UCFL207 flanged roller bearing assembly used in the transport and drive systems of Snake S1, Snake S2, Stealth Original FM, Stealth S1 FM, Warlord S3, and X-WAM S5 mowers. See quantity table for per-model counts.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Merlin - S1
- ProCut - S2
- Snake - S1
- Snake - S2
- Stealth - Original
Download Spare Parts Instructions for part number 401-020-701
| Spare Part Instructions | Model Tags |
|---|---|
| SPI 72 - Roller Bearing Replacement (LocTek to LocTek) | Snake S2 |
| SPI 39 - Rear Roller Option Fitment | Topper S1, Topper S2 |
The UCFL207 flanged bearing assembly is used in the transport and drive systems of Snake S1, Snake S2, Stealth Original FM, Stealth S1 FM, Warlord S3, and X-WAM S5 mowers. These bearings support the rollers and drive components that control cutting height and mower movement across the field. Replace both bearings in a roller as a pair when roughness or wear is detected.
- 1-3/8" bore UCFL207 flanged unit
- See quantity table below for per-mower quantities by model
- Genuine part. Maintains your Trimax warranty
Quantity per mower
Quantities are for the complete mower. If your model is not listed, check the relevant sub-assembly section of your parts manual for the correct quantity.
| Mower | Mower Width (mm) | Per mower |
|---|---|---|
| Snake S1 | 320 | 4 |
| Snake S2 | 320 | 4 |
| Snake S2 | 400 | 4 |
| Stealth Original FM | 340 | 2 |
| Stealth S1 FM | 340 | 2 |
| Warlord S3 LH | 175 – 235 | 2 |
| Warlord S3 RH | 175 – 235 | 2 |
| X-WAM S5 | — | 4 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Roller Bearing Kit - UCFL207 1-3/8" with Gasket and Grub Screw | 401-020-801 | Match bearing count | Full kit including gasket and grub screw for a complete bearing replacement. |
| Gasket - Paper - FL207 Roller Bearing Housing | 401-020-802 | 1 per bearing | Gasket for the bearing housing. Replace whenever the bearing is replaced. |
| Roller Stub Sleeve - LocTek | 414-000-076 | Check parts manual | LocTek stub sleeve used with this bearing on Pegasus S4 and Snake. |