Flail Mounting Bush - 10mm - Trimax Specification - [402-060-750]
$5.90
SKU
402-060-750
The Trimax flail mounting bush is a precision spacer that ensures correct clearance between the flail blade and its mounting components. Correct fitment reduces vibration, protects the rotor, and maintains an even cut.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Ezeemow - FX
- Ezeemow - S1
- Ezeemow - S2
- FlailDek - FX
- Pegasus - S3
No spare parts instructions available for this product.
The flail mounting bush is a precision spacer that sits between the flail blade and the mounting components on the rotor. It keeps the flail correctly spaced, which reduces vibration, protects the rotor bearings, and keeps the cut even across the full rotor width. Running worn or missing bushes accelerates wear on the mounting hardware and rotor assembly.
- Fit a new bolt, bush, and nyloc nut each time a flail is replaced
- Sized for Trimax flail mounting hardware
- Genuine part. Maintains your Trimax warranty
Bushes per mower
Quantities are for the complete mower. If your model is not listed, check the cutting system section of your parts manual for the correct quantity.
| Mower | Width code | Bushes per mower |
|---|---|---|
| Ezeemow FX | 135 | 28 |
| Ezeemow FX | 155 | 32 |
| Ezeemow FX | 185 | 40 |
| Flaildek FX | 135 | 28 |
| Flaildek FX | 155 | 32 |
| Flaildek FX | 185 | 40 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Flail - Forged Flail - Ezeemow and Flaildek - Trimax Specification | 411-160-105 | 1 bush per flail | Forged flail for Ezeemow FX and Flaildek FX. |
| Flail - Standard Flail - Ezeemow and Flaildek - Trimax Specification | 411-160-100 | 1 bush per flail | Standard flail for Ezeemow S2. |
| Bolt - Hex Head M10 x 40 - Trimax Specification | 305-210-403 | 1 per flail | Replace the bolt at each flail change. |
| Nut - Plain M10 - Trimax Specification | 307-210-013 | 1 per flail | Replace at every flail change. |